• 350.000+ tevreden klanten
  • 2.500.000+ technische artikelen
  • Voor bedrijven én particulieren
  • Vanaf € 6,95 verzendkosten
  • Achteraf betalen
  • WebwinkelKeur-cijfer: 9,4

Timken Kegellager - 30306 | 30 mm | 72 mm | 19 mm | 20,75 mm | 59,6 kN | 50,1 kN | 7.700 Rpm | 5800 Rpm

Artikelnummer: 30306 | Snelcode: s46n

Deze productfoto's zijn indicatief en kunnen afwijken van het daadwerkelijke product.
De titel, omschrijving en eigenschappen van dit product zijn bepalend.

6% korting
€ 32,77 € 30,82
Per stuk, inclusief 21% BTW
€ 25,47 per stuk, exclusief 21% BTW

Actuele verzenddatum controleren
€ 6,95 verzendkosten
Voor bedrijven én particulieren
Achteraf betalen
OF
    Eigenschappen
    Artikelnummer 30306
    Merk Timken
    Verpakkingseenheid Per stuk
    Snelcode s46n
    EAN / GTIN 0053893430799
    Andere artikelnummers 80530306, 931050026, TIMKEN30306
    Labels
    • Tractor
    • Landbouw
    • Grasland- & voedertechniek
    • Aandrijftechniek
    • Lagers en lagerhuizen
    • Voorasdelen 2WD
    • Vierwielaandrijvingsas, star
    • Kegellagers en cilindrische rollagers
    • Kegellagers
    • Steyr M 968
    • Metrische series, compleet
    • Steyr Serie 9000
    • Steyr 9078
    • Vierwielaandrijvingsas, geveerd
    • 4WD-as met ophanging en remmen
    • Starre 4WD-as met remmen
    • Agrolux 70
    • DEUTZ-FAHR Agrotron 5115.4 GStarre 4WD-as met remmen
    • DEUTZ-FAHR Agrotron 5115.4 GVierwielaandrijvingsas, star
    • Vierwielaandrinvingsas, star
    • Serie 30300..
    Referenties
    • Passend voor deze modellen
    • In deze categorieën
    • In deze overzichten

    Omschrijving van Timken Kegellager

    Info
    vanaf mach.nr.20901 (aug.1994)
    Positie
    8
    Eenheid
    per stuk
    Technische informatie
    Controleer machinenummer i.v.m. vele wijzigingen bij series vanaf 10001 t/m 20900
    Deze tussenseries zijn veelal niet in documentatie meegenomen
    d (mm)
    30 mm
    D (mm)
    72 mm
    B (mm)
    19 mm
    C
    16 mm
    T (mm)
    20,75 mm
    Draaggetallen dyn. Cr
    59,6 kN
    Draaggetallen (kN) Stat. COr
    50,1 kN
    Ref. Toerentallen olie smering
    7.700 Rpm
    Ref. Toerentallen (rpm) vet smering
    5800 Rpm
    Vraag en antwoord

    Beoordelingen
    48 beoordelingen

    rugo-2441 op 05-10-2021
    According to the website I thought i was ordering the gray 90 degree elbow only as i need 12 of those items. entire swing joint was shipped. The TSJ-PRS 90 degree elbow does fit my 1 inch rainbird swing joint. Please reply if you can supply those items.
    Waardering
    M op 01-09-2021
    Heeft een zeer goede pasvorm. Is erg mooi van kleur.
    Waardering
    Vincent op 20-06-2021
    Purchased two sets of Set11 and Set12 for new rotors for 2002 F150 RWD. Good solid sets. All metal construction good feel and smooth roll right out of the package. Greased up easy and fit the new rotors perfect.
    Waardering
    Mieke op 08-04-2021
    De kleur komt goed overeen met da afbeelding. Stof is niet te dik, een lekkere voorjaars hoodie. Pasvorm is perfect.
    Waardering
    402labs op 25-03-2021
    I work for Nucor Steel the company that makes the steel for Timken. I know first hand the quality that goes into these bearings. The strict testing the steel goes through.There is no question what bearings I will purchase.
    Waardering
    conrod0_3 op 24-03-2021
    From many years experience, I have long considered Timken bearings as being the best. My current project entailed converting from old Imperial sizes to Metric by one method or other. Timken have never failed me with my requirements. Value wise, I have no comparison to make, but I found the price of this transaction very comfortable indeed for such precision items. I recommend anybody to them....
    Waardering
    Rainer M. op 17-03-2021
    Für Flugzeugräder aus den USA braucht es eben US-Kugellager (wegen Zollmaße). Die Qualität ist die, wie der Erstausrüster. Ich denke TIMKEN kommt qulitativ mit FAG oder NSK mit.
    Waardering
    TIMOTHY op 02-03-2021
    I have a 1995 ford f150, the more common parts store bearings don't always fit the spindles properly and are sometimes the tiniest fraction too tight. I can count on Timken bearings to fit every time. Love buying made in the USA as well.
    Waardering
    Gilbert op 01-11-2020
    The part met oem quality. And Fit was precise to exact measurement. Made for painless installation and no hassle. I think that duralast quality is superb compared to other name brand companies. Because their attention to detail exceeds the standards of todays manufacturing companies.
    Waardering
    chri-3359 op 23-10-2020
    The rollers are all surrounded by a nylon material that appears injected into the roller cage and is formed all throughout the bearing all the way to the cup, I thought it was a protective coating or something but is impossible to get out of the cage so. I assume just get the stuff out of the immediate way where its blocking motion but leave it where it sits inside the cage because Im sure it serves a purpose but Ive never seen Something like that
    Waardering
    Christophe op 11-09-2020
    Marque recommandé pour machine outil
    Waardering
    Muturi op 27-07-2020
    Alot me
    Waardering
    Jiame op 16-07-2020
    Perfect fit , good quality. At a good price
    Waardering
    gloryglo op 14-07-2020
    Excited to find these. The box for these has a 2016 date, so I assume they have been discontinued. All I can find in stores now are zinc or brass. From my past experience, the metal ones corrode. And yes plastic has a limited lifetime too, but I prefer these over the metal ones. Again I was very excited when I found these online for sale, and have been very pleased with the performance of them. Not only that, but now I have backups! Probably for years...
    Waardering
    Enrique op 11-07-2020
    I replaced the front hubs on my motor home and wanted to put new bearings in for peace of mind. However, the CHINA stamp gave me pause. I am counting on Duralast to enforce QC from their source.
    Waardering
    MATTHEW op 26-06-2020
    Was looking for an American made bearing kit for the boat trailer and couldn’t find one, had to piece together my own. Bearings itself seems fine, no complaints yet, however very little use so far, (Maybe 75 miles)
    Waardering
    jbun8388 op 15-06-2020
    This is whats needed to support the small roller bearings that that fit on the outsides of the rim. ( front and back of wheel ) The cage bearing supports the center of the wheel surface and keeps the spindles from wearing on the outsides. Put a 1/8" pipe plug in to replace the grease zirk on the wheel. Pre-pack the cage bearing and slip it into the center of the wheel. Then replace the outside bearing and install back on tractor. Sealed bearings on the oursides of the cage, will protect it from the elements.
    Waardering
    emeline op 03-06-2020
    Excellent produit
    Waardering
    emeline op 03-06-2020
    Excellent produit
    Waardering
    r280031 op 21-05-2020
    precision made in USA.
    Waardering
    GENE op 05-05-2020
    I went to a little more effort to buy Timken bearings hoping to support an American company producing things in the USA. Hopefully I'm right. The cup was well packaged, looked good and fit well.
    Waardering
    Peter op 18-03-2020
    Worked as expected. Cleaned and repacked the opposite wheel's bearings while I was at it. It doesn't pay to buy a more expensive wheel bearing as they mostly have the same warranty.
    Waardering
    gerald g. op 21-01-2020
    Très bon rapport qualité prix
    Waardering
    69Camaroguy op 26-12-2019
    This race also fits the rear swing arm on a late 1970's Harley Davidson Sportster. That is what I used it on and it fits perfectly because that's what was used by the factory. Cheapest place I could find one.
    Waardering
    burdons58 op 11-12-2019
    Arrived quickly. Is good quality
    Waardering
    Eric S. op 04-12-2019
    Conforme à mes attentes
    Waardering
    baoh_2330 op 23-11-2019
    I would like to say I really appreciate Monroe rear air strut shocks got my Cadillac sitting High ride and gliding make me feel like I'm riding in Grandma and Grandpa Cadillac back in the day......
    Waardering
    Justin op 13-11-2019
    Front end vibration on my Excursion was starting to get worse. Replaced bearings and races on both front wheels (as well as tie rods, drag links, and sway bar bushings). Now everything is smooth as silk. Note: Each front wheel has an inner and outer bearing that sits within a circular bearing race. When replacing a bearing, make sure you replace the race as well.both the bearing and the race a new bearing race
    Waardering
    govek52 op 05-11-2019
    new very good price
    Waardering
    Flexibilis op 16-10-2019
    Meilleur tarif sur le marché !
    Waardering
    Eric N. op 25-09-2019
    Rien à dire efficace et rapide très bon produit
    Waardering
    Francois G. op 20-08-2019
    Conforme super produit
    Waardering
    5554448869 op 19-08-2019
    Needed Timken bearing for the front steering axel of my 50 Dodge PW and found it It was NOS Timken in the old style packaging . It was clean lightly lubricated and ready to go. The shipping was fast which allowed me to install sooner. Happy with the quality and results.
    Waardering
    Matt in PA op 08-08-2019
    I needed to replace the rotors in my truck and didn't realize that included bearings as well. When I got these, I tried to install both the metal ring as well as the bearings into the rotor. Needless to say, the seal did not fit over that. Eventually, I realized that the metal ring doesn't get installed with the bearings, and once I took that out, everything fit just fine. Hope someone can save some time thanks to my learning experience. Bearings work just fine and are a great price.
    Waardering
    hemmkevi op 25-07-2019
    As posted in listing.
    Waardering
    djp op 01-02-2019
    Bon produit , qualité bonne , marque connue , R A S
    Waardering
    Emmanuel op 16-11-2018
    Excellente qualité, conforme à la description, le produit est arrivé super bien emballé et très rapidement expédié . 100% satisfait. Merci !
    Waardering
    Ghislain op 22-07-2018
    nickel
    Waardering
    paulreneat op 03-05-2018
    Shocks arrived with one of the 4 boxes open at end flap. Only the strut nut was missing. Not a problem as I used nut from old strut. We have not driven the car yet with all 4 new shocks installed. Monroe used to have a good name, and a guy at Carquest recommended the Monroe struts. I bought the pair of Strut compressors at Napa Auto. Buy the set that has 2 grabbers at one end and 1 grabber at the other end. Narrow coil gap on Honda coils does not accept every coil compressor in the market place, so make sure that you have the right coil compressors before taking stuff apart under the wheels.
    Waardering
    pol389 op 08-11-2017
    There are cheaper Chinese bearings but they were not as accurate so had to be forced in. These were spot on.
    Waardering
    w981uoj op 23-08-2017
    Great value, you might get another make a few pounds cheaper but is it worth it.
    Waardering
    Edward op 25-07-2017
    I bought these along with 1ASHS00971 wheel bearing set to replace both sets of bearings in the front hub of my 2003 Nissan Xterra SE 4X4. These were an exact fit and a great quality. I highly recommend having the proper tools when removing the old races and installing the new ones. Fortunately I have a friend who is a mechanic and let me borrow his tools for this. The only other thing you will need to buy is a good quality wheel bearing grease to repack them and the hub when installing them.
    Waardering
    uganda1958 op 12-07-2017
    The product is original part.and the best quality.
    Waardering
    mikbarb op 31-03-2017
    Perfect item
    Waardering
    gator915nco op 28-10-2016
    Everything went together quickly, easily with no issue. The ride of my Titan has improved significantly. I am amazed at how much sag was in the old shocks. When I put these it, it raised the front of my truck to just the right height. I have been driving around on them for a week now and a lot of the old bouncing sounds have gone away, The control through corners has increased dramatically and I am very happy. I wouldn't hesitate to buy them in the future. Don't over pay with other sellers!!!!!!
    Waardering
    Tim op 30-09-2016
    Ordered enough to do front and rear wheels. Tapered roller bearings and races. Was going to go all balls sealed bearings. But said needed hundred and some dollar puller and installer tool to put in and take out. .have old style tool got from Harbor Freight years ago. . Some people still use sockets and brass punch. Your call. Only way can get Timken bearings from Harley is order whole hub and all for front and rear. Put races in. Packed bearings . Everything went right together. Old school freeze bearing and race. Pack bearing. Lightly heat hub. They go right together. I had race and bearing installation tool. Went right in. Up to you or not to heat hub and freeze other parts. I(did not need to.
    Waardering
    boy230 op 30-04-2016
    Good value
    Waardering
    Kojack op 09-07-2015
    Sets A3 & A6 were outsourced to Hungary several years ago and quality suffered. These bearing sets were brought back to be manufactured again here in America and I am happy to hear this.
    Waardering
    Bekijk alle 48 beoordelingen »
    Nieuwe beoordeling
      1 ster 2 sterren 3 sterren 4 sterren 5 sterren
    Waardering