• 350.000+ tevreden klanten
  • 2.500.000+ technische artikelen
  • Voor bedrijven én particulieren
  • Vanaf € 6,95 verzendkosten
  • Achteraf betalen
  • WebwinkelKeur-cijfer: 9,4

Timken Kegellager - 2769527620 | 090009537 | 84.975 mm | 125.412 mm | 25.4 mm | 19,845 mm | 25.4 mm | 1,5 mm

Artikelnummer: 2769527620 | Snelcode: pf6h

Deze productfoto's zijn indicatief en kunnen afwijken van het daadwerkelijke product.
De titel, omschrijving en eigenschappen van dit product zijn bepalend.

9% korting
€ 381,17 € 350,38
Per stuk, inclusief 21% BTW
€ 289,57 per stuk, exclusief 21% BTW

Actuele verzenddatum controleren
€ 6,95 verzendkosten
Voor bedrijven én particulieren
Achteraf betalen
OF
    Eigenschappen
    Artikelnummer 2769527620
    Merk Timken
    Verpakkingseenheid Per stuk
    Snelcode pf6h
    EAN / GTIN 0053893044910
    Andere artikelnummers 27695/27620, 276959X021, TIMKEN2769527620, 090009537
    Labels
    • Tractor
    • Aandrijftechniek
    • Lagers en lagerhuizen
    • Achteras
    • Kegellagers en cilindrische rollagers
    • Kegellagers
    • Inch series - compleet (gesorteerd op afmeting)
    • Inch series - compleet (gesorteerd op artikelcode)
    Referenties
    • Passend voor deze modellen
    • In deze categorieën
    • In deze overzichten

    Omschrijving van Timken Kegellager

    Origineelnummer
    090009537
    Positie
    Fig.L 3,4,5,6
    Eenheid
    per stuk
    d (mm)
    84.975 mm
    D (mm)
    125.412 mm
    B (mm)
    25.4 mm
    C
    19,845 mm
    T (mm)
    25.4 mm
    Max. as radius R
    5 mm
    Max. huis radius r
    1,5 mm
    Vraag en antwoord

    Beoordelingen
    15 beoordelingen

    DCJack op 16-12-2021
    These fit like they should but don't seem to have a very long life span. 2 years in was going to clean and repack , but upon inspection after cleaning there were some imperfections on the rollers . So ended up getting new ones.
    Waardering
    steeldustmite op 20-10-2021
    They get the job done and last a long while in oversized tires lifted 4x4 truck. I've used them before and it was time to use them again. The old ones have been tested through all types of weather and dirt.
    Waardering
    402labs op 25-03-2021
    I work for Nucor Steel the company that makes the steel for Timken. I know first hand the quality that goes into these bearings. The strict testing the steel goes through.There is no question what bearings I will purchase.
    Waardering
    conrod0_3 op 24-03-2021
    From many years experience, I have long considered Timken bearings as being the best. My current project entailed converting from old Imperial sizes to Metric by one method or other. Timken have never failed me with my requirements. Value wise, I have no comparison to make, but I found the price of this transaction very comfortable indeed for such precision items. I recommend anybody to them....
    Waardering
    TIMOTHY op 02-03-2021
    I have a 1995 ford f150, the more common parts store bearings don't always fit the spindles properly and are sometimes the tiniest fraction too tight. I can count on Timken bearings to fit every time. Love buying made in the USA as well.
    Waardering
    MARK op 17-02-2021
    I purchased these bearings for the transmission on my Allis Chalmers G. They were a great fit and a lot cheaper than from antique tractor suppliers. They arrived much earlier than was estimated.
    Waardering
    infg_ba_1kz3njmyg op 12-01-2021
    They last only a year or two before they start to seize up. Need continuous lube to prolong life. Believe this style does any brand you buy. Priced better than others.
    Waardering
    Brian op 17-12-2020
    Waardering
    gloryglo op 14-07-2020
    Excited to find these. The box for these has a 2016 date, so I assume they have been discontinued. All I can find in stores now are zinc or brass. From my past experience, the metal ones corrode. And yes plastic has a limited lifetime too, but I prefer these over the metal ones. Again I was very excited when I found these online for sale, and have been very pleased with the performance of them. Not only that, but now I have backups! Probably for years...
    Waardering
    Enrique op 11-07-2020
    This is the inner front wheel bearing for a 1995 motor home built on a Ford E 350 chassis. The first thing I noted was the CHINA name on the bearing. Not being very familiar with bearings in general, I decided to go with it with the hope that Duralast enforces acceptable QC from their source. I will revise my rating later if needed. The bearing rattled like maracas until I firmly packed them with grease. I will soon get the motor home back on the road to give them a good run.
    Waardering
    69Camaroguy op 26-12-2019
    This race also fits the rear swing arm on a late 1970's Harley Davidson Sportster. That is what I used it on and it fits perfectly because that's what was used by the factory. Cheapest place I could find one.
    Waardering
    Justin op 13-11-2019
    Front end vibration on my Excursion was starting to get worse. Replaced bearings and races on both front wheels (as well as tie rods, drag links, and sway bar bushings). Now everything is smooth as silk. Note: Each front wheel has an inner and outer bearing that sits within a circular bearing race. When replacing a bearing, make sure you replace the race as well.both the bearing and the race a new bearing race
    Waardering
    Edward op 25-07-2017
    I bought these along with 1ASHS00971 wheel bearing set to replace both sets of bearings in the front hub of my 2003 Nissan Xterra SE 4X4. These were an exact fit and a great quality. I highly recommend having the proper tools when removing the old race's and installing the new one's. Fortunately I have a friend who is a mechanic and let me borrow his tools for this. The only other thing you will need to buy is a good quality wheel bearing grease to repack them and the hub when installing them.
    Waardering
    CameronCarlBrown op 15-05-2017
    Part was direct replacement, easy to find on the site. Shipping was fast. Parts took care of my bad wheel bearings and now my ride is smooth and quite! Installation hints: Clean mating surface after old bearing is pressed out with high speed sander. Apply automotive all purpose grease on outside of new bearing before re-assembly to help reduce friction between parts.
    Waardering
    2bhuntingreen op 15-03-2017
    When I had to replace my front hub assembly on both sides cause I purchased a cheaper brand the first time. I set out to purchase the good stuff. I have always liked to use timken bearings, so when I found these available and at a very reasonable price. I had to purchase them. The quality of this product was much greater than the previously cheaper brand that I had mentioned.
    Waardering
    Bekijk alle 15 beoordelingen »
    Nieuwe beoordeling
      1 ster 2 sterren 3 sterren 4 sterren 5 sterren
    Waardering